• +91-9920207386
  • riyan@pipesind.com
  • Home
  • Stainless Steel 304L Round Bar

Stainless Steel 304L Round Bar

Products We Offer

Stainless Steel 304L Round Bar

Bars and rods are made up of various materials, stainless steel being one of them. These materials can be further classified into different specifications as per their quality. Stainless Steel 304L Round Bar is one such bar that is made up of chromium and nickel alloy. DIN 1.4306 Polished Bar is said to offer high tensile strength and possess lower corrosion resistance properties. A Higher operating temperature is possible for JIS SUS 304L black bar due to the higher melting point of 1400 Degrees C. The lower carbon content in ss 304l bright bar discourages sensitization of grain boundary precipitation. These bars allow the workers to obtain optimum results while welding.

The use of  304L Steel Cold Finished Bars is limited as it is structurally sound. The length of these AISI 304l threaded bars varies between 1m to 6m. However, the outside diameter may range between 4mm to 100mm. These bars are available in various shapes such as round, square, hex, and so on. WNR 1.4306 square bar has different finishes such as bright polished, matt finish, black, rough turned, and so on. These bars are widely used due to their high geometrical strength. ASTM A479 UNS S30403 hex bar is widely used in construction and other commercial applications. To increase the stability nitrogen was added to the alloy.

Stainless steel 304l round bars display excellent welding and forming quality and are not subjected to stress related corrosion cracking at temperatures above 60 degrees C. Moreover, these ASTM A276 type 304L flat bars are also not vulnerable to pitting and crevice corrosion in the presence of a warm chloride environment. They are also pocket-friendly and are used in several applications. Though the corrosion resistance of these 304L stainless steel rods is high and yet they are not as high as 316 or 316L grade. Hence they are used in environments that are corrosive enough to cause intergranular corrosion of welds at heat-affected areas. 304L Stainless steel welding rod resists oxidation corrosion up to 1690 degrees C. Hence they are also used in various aqueous mediums.

Stainless Steel 304L Round Bar

ASTM A276 Type 304L Flat Bar Size Chart

Size (inch.) Thk. (mm) Sizes (mm) Thk. (inch.)
7/8 17 & 18 22 2/3 - 5/7
1-6/7 17,25 & 32 47 2/3, 1 & 1-1/4
2-3/8 5 to 35 60 3/16 - 1-3/8
2-1/16 5 to 25 55 3/16 - 1
1 5 to 20 25 3/16 - 4/5
2-3/4 6 to 25 & 40 70 1/4 - 1, & 1-4/7
3-1/2 8 to 20 90 5/16- 4/5
3-1/8 8 to 20 80 5/16 - 4/5
1-3/16 5 to 20 30 3/16 - 4/5
1-1/4 6 to 20 32 1/4 - 4/5
1-3/8 5 to 20 35 3/16 - 3/16
1-4/7 5 to 25 40 3/16 - 1
2-1/4 32 57 1-1/4
2-1/2 10 to 30 63 3/8 - 1-3/16
1-7/9 5 to 25 45 3/16 - 1
2 5 to 32 50 3/16 - 1-1/4
2-5/9 10 to 30 & 35 65 3/8 - 1-3/16, & 1-3/8
3 8 to 25 75 5/16 - 1
4 8, 10, 12 100 5/16, 3/8, 1/2

Weight Table of Stainless Steel 304L Round Bars

Size Kg / Meter Kg / Foot Size Kg / Meter Kg / Foot Size Kg / Meter Kg / Foot
1/8" 0.062 0.019 22 millimetre 2.979 0.908 3 to 1/4" 41.996 12.800
3 millimetre 0.055 0.017 20 millimetre 2.470 0.753 3" 35.762 10.900
4 millimetre 0.098 0.030 24 millimetre 3.543 1.080 3 to 3/4" 55.780 17.001
5/32" 0.095 0.029 7/8" 3.038 0.926 3 to 1/2" 48.772 14.850
5 millimetre 0.154 0.047 1" 3.970 1.210 4 to 1/4" 72.249 21.908
3/16" 0.141 0.043 25 millimetre 3.871 1.180 4" 63.340 19.306
6 millimetre 0.223 0.068 27 millimetre 4.490 1.368 4 to 3/4" 90.249 27.366
7/32" 0.190 0.058 26 millimetre 4.170 1.271 4 to 1/2" 80.340 24.4487
7 millimeter 0.298 0.091 30 millimeter 5.548 1.691 5 to 1/2" 121.000 36.690
1/4" 0.249 0.076 1 to 1/8" 5.033 1.534 5" 99.940 30.461
8 millimeter 0.398 0.120 32 millimeter 6.314 1.894 6 to 1/2" 167.630 51.093
5/16" 0.387 0.118 1 to 1/4" 6.349 1.924 6" 143.900 43.860
3/8" 0.557 0.170 35 millimeter 7.553 2.390 7 to 1/2" 225.000 68.226
9 millimeter 0.498 0.152 1 to 3/8" 7.550 2.303 7" 196.000 59.432
11 millimeter 0.748 0.228 38 millimeter 8.903 2.792 10" 397.140 121.048
10 millimeter 0.620 0.189 36 millimeter 7.999 2.438 8" 254.55 77.586
12 millimeter 0.889 0.271 40 millimeter 9.872 3.009      
7/16" 0.761 0.232 1 to 1/2" 8.951 2.715      
13 millimeter 1.043 0.318 1 to 3/4" 12.179 3.712      
1/2" 0.994 0.303 1 to 5/8" 10.449 3.200      
9/16" 1.256 0.383 1 to 7/8" 13.977 4.260      
14 millimeter 1.207 0.368 45 millimeter 12.555 3.807      
5/8" 1.551 0.473 50 millimeter 15.414 4.698      
15 millimeter 1.391 0.424 48 millimeter 14.205 4.330      
17 millimeter 1.791 0.543 2 to 1/8" 17.963 5.475      
16 millimeter 1.578 0.481 2" 15.906 4.848      
18 millimeter 2.001 0.610 60 millimeter 22.205 6.768      
11/16" 1.880 0.573 2 to 1/4" 20.128 6.135      
3/4" 2.237 0.682 2 to 3/8" 22.435 6.838      
      2 to 1/2" 24.856 7.576      
      2 to 5/8" 27.409 8.354      
      2 to 3/4" 30.083 9.169      

Fastest Growing 304L Stainless steel welding rod Supplier in India, Check WNR 1.4306 Hollow Bar available Outer Diameter.

AISI 304L Threaded Bar Material Specification Chart

Size of Billet 1/2 - 495 mm Diameter
Grade 304L
Standard ASTM A276/ ASME SA276
Dimensions AISI | EN | BS | ASME | ASTM | JIS | DIN
Surface Cold Drawn, Bright, Hairline, Polished, Hot Rolled Pickled, Sand Blasting Finished
Section Bar 3.0 - 12.0 milimeter thk
Sizes of Flat Bar Width: 10 - 500 mm
Diam.: 3 ~ 800 milimetre
Angle Bar Sizing 3 mm * 20 mm * 20 mm ~ 12 milimetre * 100 milimetre * 100 milimetre
Tolerance Supplier in H9, K11, H8, H12, H11, H13, K10, H10, K12, K9 or as per demand
Size of Channel Bar 5 - 6 millimeter thk., 80 x 40 millimeter - 150 x 75 milimetre
Form Round Rod, Billet, Round, Rectangle, Rod, Forging, Hex (A/F), Rings, Channel Bar, Half Round Bar, Square, I/H Bar, Ingot, Precision Ground Bar, Flat Bar, Triangle, Blocks, T Bar, Profiles, Threaded, Hollow etc.
Round Bar Size Thk.: 2 to 100 milimetre
Delivery Condition Hardened, Tempered, Annealed
Hollow Bar Size 32 millimeter O.D. x 16 mm I.D. to 250 millimeter O.D. x 200 mm I.D.)
Know SUS 304L Bright bar Weight formula, Exporter of AISI 304L Stainless steel Rod.

Composition Chart of SS 304L Bright Bar

Grade Carbon Manganese Silicon Phospherous Sulfur Chromium Molybdenum Nickel Nitrogen
SS 304L 0.03 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 - 8 – 12 0.10 max

304L Stainless Steel Welding Rod Equivalent Grades

STANDARD WERKSTOFF NR. EN BS GOST UNS JIS AFNOR
Stainless Steel 304L 1.4306/1.4307 X2CrNi18-9 / X2CrNi19-11 304S11 03Х18Н11 S30403 SUS 304L Z3CN18‐10

DIN 1.4306 Polished Bar Mechanical Characteristics

Element SS 304L
Density 8
Melting Point 1400 ℃
Tensile Strength 485
Yield Strength (0.2%Offset) 170
Elongation 40
Hardness (Brinell) 201

 

Contact for best SS 304L Solid Bar at low-price, Cut to size ASTM A479 Grade 304 Pump Shaft, Stainless Steel 304L Cold Drawn Round Bar Dimensions Chart.

WNR 1.4306 Square Bar Dimensional Table

Width or Dia.(millimetre) Wght / m Sectional Area Perimeter
Round
(kilogram)		 Square
(kilogram)		 Round
(centimetre²)		 Square
(centimetre²)		 Round
(centimeter)		 Square
(centimeter)
5.0 0.15 0.20 0.20 0.25 1.57 2.0
5.5 0.19 0.24 0.24 0.30 1.78 2.2
6.0 0.22 0.28 0.28 0.36 1.88 2.4
7.0 0.30 0.38 0.38 0.49 2.20 2.8
8.0 0.39 0.50 0.50 0.64 2.51 3.2
9.0 0.50 0.64 0.64 0.81 2.83 3.6
10 0.63 0.73 0.79 1.00 3.14 4.0
11 0.75 0.95 0.95 1.21 3.46 4.4
12 0.89 1.13 1.13 1.44 3.77 4.8
14 1.21 1.54 1.54 1.96 4.40 5.6
16 1.58 2.01 2.01 2.56 5.03 6.4
18 2.00 2.54 2.54 3.24 5.65 7.2
20 2.47 3.14 3.14 4.00 6.28 8.0
22 2.98 3.80 3.80 4.84 6.91 8.8
25 3.85 4.91 4.91 6.25 7.85 10.0
28 4.83 6.15 6.16 7.84 8.80 11.2
32 6.31 8.04 8.04 10.24 10.05 12.8
36 7.99 10.17 10.18 12.96 11.31 14.4
40 9.86 12.56 12.57 16.00 12.57 16.0
45 12.49 15.90 15.90 20.25 14.14 18.0
50 15.41 19.62 19.64 25.00 15.71 20.0
56 19.34 24.62 24.63 31.36 17.59 22.4
63 24.47 31.16 31.17 36.69 19.79 25.2
71 31.08 39.57 39.59 50.41 22.31 28.4
80 39.46 50.24 50.27 64.00 25.13 32.0

Sizing Range of 304L Stainless Steel Hollow Bar

Sizing Chucked true to Outer Dia. Chucked true to Inner Dia.
I.D.
millimetre		 O.D.
mm		 Min. ID,
millimetre		 Maximum
OD,
mm		 Min. ID,
inch		 Maximum
OD,
in.		 Min. ID,
millimetre		 Maximum
OD,
millimetre		 Min. ID,
inches		 Maximum OD,
in.
20 32 21.9 31 0.862 1.220 21 30 0.827 1.185
16 32 18 31 0.709 1.220 17 30 0.669 1.181
25 36 26.9 35 1.059 1.378 26 34.1 1.024 1.343
20 36 22 35 0.866 1.378 21 34 0.827 1.339
16 36 18.1 35 0.713 1.378 17 33.9 0.669 1.335
28 40 29.9 39 1.177 1.535 29 38.1 1.142 1.500
25 40 27 39 1.063 1.535 26 38 1.024 1.496
20 40 22.1 39 0.870 1.535 21 37.9 0.827 1.492
32 45 33.9 44 1.335 1.732 33 43.1 1.299 1.697
28 45 30 44 1.181 1.732 29 43 1.142 1.693
20 45 22.2 44 0.874 1.732 21 42.8 0.827 1.685
36 50 38 49 1.496 1.929 37 48 1.457 1.890
32 50 34.1 49 1.343 1.929 33 47.9 1.299 1.886
25 50 27.2 49 1.071 1.929 26 47.8 1.024 1.882
40 56 42 55 1.654 2.165 41 54 1.614 2.126
36 56 38.1 55 1.500 2.165 37 53.9 1.457 2.122
28 56 30.3 55 1.193 2.165 29 53.7 1.142 2.114
50 63 51.9 62 2.043 2.441 51 61.1 2.008 2.406
45 63 47 62 1.850 2.441 46 61 1.811 2.402
40 63 42.2 62 1.661 2.441 41 60.8 1.614 2.394
36 63 38.3 62 1.508 2.441 37 60.7 1.457 2.390
32 63 34.4 62 1.354 2.441 33 60.6 1.299 2.386
56 71 58 69.9 2.283 2.752 57 68.9 2.244 2.713
45 71 47.3 69.9 1.862 2.752 46 68.6 1.811 2.701
40 71 42.4 69.9 1.669 2.752 41 68.5 1.614 2.697
36 71 38.5 69.9 1.516 2.752 37 68.4 1.457 2.693
60 75 62 73.8 2.441 2.906 61 72.8 2.402 2.866
50 75 52.2 73.8 2.055 2.906 51 72.6 2.008 2.858
40 75 42.5 73.8 1.673 2.906 41 72.3 1.614 2.846
63 80 65 78.8 2.559 3.102 64 77.8 2.520 3.063
50 80 52.4 78.8 2.053 3.102 51 77.4 2.008 3.047
45 80 47.5 78.8 1.870 3.102 46 77.3 1.811 3.043
40 80 42.6 78.8 1.677 3.102 41 77.2 1.614 3.039
67 85 69.1 83.7 2.720 3.295 68 82.6 2.677 3.252
55 85 57.4 83.7 2.260 3.295 56.0 82.3 2.205 3.240
45 85 47.6 83.7 1.874 3.295 46.0 82.1 1.811 3.232
71 90 73.1 88.6 2.878 3.488 72.1 87.6 2.839 3.449
63 90 65.3 88.6 2.571 3.488 64.0 87.3 2.520 3.437
56 90 58.5 88.6 2.303 3.488 57.0 87.1 2.244 3.429
50 90 52.6 88.6 2.071 3.488 51.0 87.0 2.008 3.425
75 95 77.3 93.5 3.041 3.681 76.2 92.4 2.997 3.641
67 95 69.3 93.5 2.728 3.681 68.0 92.2 2.677 3.630
50 95 52.7 93.5 2.075 3.681 51.0 91.8 2.008 3.614
80 100 82.3 98.5 3.240 3.878 81.2 97.4 3.197 3.835
71 100 73.4 98.5 2.890 3.878 72.1 97.2 2.839 3.827
63 100 65.5 98.5 2.579 3.878 64.0 97.0 2.520 3.819
56 100 58.7 98.5 2.311 3.878 57.0 96.8 2.244 3.811
80 106 82.5 104.4 3.248 4.110 81.2 103.1 3.197 4.059
71 106 73.5 104.4 2.894 4.110 72.1 103.0 2.839 4.055
63 106 65.7 104.4 2.587 4.110 64.0 102.7 2.520 4.043
56 106 58.9 104.4 2.319 4.110 57.0 102.5 2.244 4.035
90 112 92.5 110.3 3.642 4.343 91.4 109.2 3.598 4.299
80 112 82.6 110.3 3.252 4.343 81.2 108.9 3.197 4.287
71 112 73.7 110.3 2.902 4.343 72.1 108.7 2.839 4.280
63 112 65.8 110.3 2.591 4.343 64.0 108.5 2.520 4.272
90 118 92.7 116.2 3.650 4.575 91.4 114.9 3.598 4.524
80 118 82.8 116.2 3.260 4.575 81.2 114.6 3.197 4.512
71 118 73.8 116.2 2.906 4.575 72.1 114.5 2.839 4.508
63 118 66.0 116.2 2.598 4.575 64.0 114.2 2.520 4.496
100 125 102.7 123.1 4.043 4.846 101.5 121.9 3.996 4.799
90 125 92.8 123.1 3.654 4.846 91.4 121.7 3.598 4.791
80 125 82.9 123.1 3.264 4.846 81.2 121.4 3.197 4.780
71 125 74.0 123.1 2.913 4.846 72.1 121.3 2.839 4.772
106 132 108.8 130.0 4.283 5.118 107.6 128.8 4.236 5.071
90 132 93.0 130.0 3.661 5.118 91.4 128.4 3.598 5.055
80 132 83.1 130.0 3.272 5.118 81.2 128.1 3.197 5.043
71 132 74.2 130.0 2.921 5.118 72.1 121.2 2.839 5.035
112 140 115 137.9 4.528 5.429 113.7 136.6 4.476 5.378
100 140 103.1 137.9 4.059 5.429 101.5 136.3 3.996 5.366
90 140 93.2 137.9 3.669 5.429 91.4 136.1 3.598 5.358
80 140 83.3 137.9 3.280 5.429 81.2 135.8 3.197 5.346
125 150 128.1 147.7 5.043 5.815 126.9 146.5 4.996 5.768
106 150 109.3 147.7 4.303 5.815 107.6 146 4.236 5.748
95 150 98.4 147.7 3.874 5.815 96.4 145.7 3.795 5.736
80 150 83.6 147.7 3.291 5.815 81.2 145.3 3.197 5.720
132 160 135.3 157.6 5.327 6.205 134 156.3 5.276 6.154
122 160 125.4 157.6 4.937 6.205 123.8 156 4.874 6.142
112 160 115.5 157.6 4.547 6.205 113.7 155.8 4.476 6.134
90 160 94.0 157.6 3.701 6.205 91.4 155.2 3.598 6.110
140 170 143.5 167.4 5.650 6.591 142.1 166 5.594 6.535
130 170 133.6 167.4 5.260 6.591 132 165.8 5.197 6.528
128 170 131.6 167.4 5.181 6.591 130 165.7 5.118 6.524
118 170 121.7 167.4 4.791 6.591 119.8 165.5 4.717 6.516
106 170 109.8 167.4 4.323 6.591 107.6 165.2 4.236 6.504
100 170 103.9 167.4 4.091 6.591 101.5 165 3.996 6.496
150 180 153.6 177.3 6.047 6.980 152.3 176 5.996 6.929
140 180 143.7 177.3 5.657 6.980 142.1 175.7 5.594 6.917
125 180 128.9 177.3 5.075 6.980 126.9 175.3 4.996 6.902
100 180 104.1 177.3 4.098 6.980 101.5 174.7 3.996 6.878
160 190 163.8 187.1 6.449 7.366 162.4 185.7 6.394 7.311
150 190 153.9 187.1 6.059 7.366 152.3 185.5 5.996 7.303
132 190 136 187.1 5.354 7.366 134 185.1 5.276 7.287
170 200 173.9 197.0 6.846 7.756 172.6 195.6 6.795 7.701
160 200 164 197.0 6.457 7.756 162.4 195.4 6.394 7.693
150 200 154.1 197.0 6.067 7.756 152.3 195.2 5.996 7.685
140 200 144.2 197.0 5.677 7.756 142.1 194.9 5.594 7.673
170 212 174.2 208.8 6.858 8.220 172.6 207.2 6.795 8.157
150 212 154.4 208.8 6.079 8.220 152.3 206.6 5.997 8.133
130 212 134.6 208.8 5.299 8.220 132 206.2 5.197 8.118
180 224 184.4 220.6 7.260 8.685 182.7 218.9 7.193 8.618
140 224 144.8 220.6 5.701 8.685 142.1 217.9 5.594 8.579
190 236 194.6 232.4 7.661 9.150 192.9 230.7 7.594 9.083
150 236 155.0 232.4 6.102 9.150 152.3 229.7 5.996 9.043
200 250 204.9 246.2 8.067 9.693 203.0 244.3 7.992 9.618
200 275 205.4 268.9 8.087 10.587 203.0 266.5 7.992 10.492

Forms & Shapes of SUS 304L Rectangular Bar

  •  Precision Ground Bars
  •  Flat Bars
  •  Rod
  •  Rings
  •  Channel Bars
  •  Blocks
  •  Round Rod
  •  T-Bars
  •  Round
  •  Square
  •  Hollow
  •  Triangle
  •  Hex (A/F)
  •  Rectangular Bar
  •  Threaded
  •  Rectangle
  •  I/H Bars
  •  Ingot
  •  Half Round Bars
  •  Profiles
  •  Billet
  •  Forging

Stainless Steel 304L Rod Rate Chart

Product Price
Polished 304 Stainless steel bar $1.00 - $1.30/ Kilogram
304L Anti-rust And Anti-corrosion Environmental Protection Hexagonal Stainless Steel Rod $2.00/ Ton
25mm 304L Stainless steel hex bar $1,780.00 - $2,140.00/ Ton
304L 3/16 X 3/16 Square Bar 304 Stainless Steel Square Rod $1.75 - $2.32/ Kilogram

Choose us for the best price of ASTM A479 304L Shaft in India, Many 304L Stainless Steel Threaded Rod suppliers, retailers, importers, stockists, wholesalers, stockholders, distributors, dealers, and exporters Find your sizes in our stock of SA 479 Gr 304L Hot Rolled Round Bar in Mumbai, Contact for a Quick Quote!

304L Stainless Steel Bar Dimensions

Cold Drawn Hot Rolled Hot Forging
Outer Dia.
(millimeter)		 Outer Dia.
(millimetre)		 Outer Dia.
(millimeter)		 Outer Dia.
(millimetre)		 Outer Diameter
(millimetre)		 Outer Diameter
(millimeter)		 Outer Dia.
(millimetre)		 Outer Diameter
(millimeter)
φ2 φ27 φ85 φ8 φ45 φ140 φ50 φ150
φ3 φ28 φ90 φ10 φ48 φ145 φ55 φ155
φ4 φ30 φ95 φ12 φ50 φ150 φ60 φ160
φ5 φ32 φ100 φ14 φ55 φ155 φ65 φ165
φ6 φ34   φ15 φ60 φ160 φ70 φ170
φ7 φ35   φ16 φ65 φ165 φ75 φ180
φ8 φ36   φ18 φ70 φ170 φ80 φ185
φ9 φ38   φ20 φ75 φ180 φ85 φ190
φ10 φ40   φ22 φ80 φ185 φ90 φ195
φ11 φ42   φ24 φ85 φ190 φ95 φ200
φ12 φ45   φ25 φ90 φ195 φ100 φ210
φ14 φ46   φ27 φ95 φ200 φ105 φ220
φ15 φ48   φ28 φ100 φ210 φ110 φ230
φ16 φ50   φ30 φ105 φ220 φ115 φ240
φ18 φ55   φ32 φ110 φ230 φ120 φ250
φ19 φ60   φ35 φ115 φ240 φ125 φ260
φ20 φ65   φ36 φ120 φ250 φ130 φ270
φ22 φ70   φ38 φ125 φ260 φ135 φ280
φ24 φ75   φ40 φ130 φ270 φ140 φ300
φ25 φ80   φ42 φ135 φ280 φ145  

SS 304L Welding Rod Standards

Specifications: ASTM A479, ASTM A182, ASTM A276
International Specifications: Euronorm: X6CrNi08-10 Werstoff# 1.4306

Size of ASTM A479 UNS S30403 Hex Bar

Size (in.) Wght / 12 inch Wght per Ft
9/16″ 11.16 0.930
     
13/16″ 23.40 1.950
3/16″ 1.248 0.104
7/16″ 6.72 0.560
3/8″ 4.920 0.420
1-1/16″ 39.60 3.30
1/4″ 2.160 0.180
15/16″ 31.20 2.600
1-1/4″ 55.20 4.600
1-7/16″ 73.20 6.100
1-5/8″ 93.60 7.800
5/16″ 3.480 0.290
1/2″ 8.880 0.740
5/8″ 13.80 1.150
2-3/8″ 203.04 16.920
1-1/2″ 79.20 6.600
1-5/16″ 61.20 5.100
2-1/4″ 179.04 14.920
1-7/8″ 124.80 10.400
11/16″ 16.68 1.390
3″ 318.36 26.53
1-3/4″ 108.36 9.030
3/4″ 19.92 1.660
7/8″ 27.60 2.300
1″ 34.80 2.90
1-1/8″ 44.40 3.700
1-3/8″ 67.20 5.600
2″ 141.60 11.80
2-1/2″ 221.04 18.42

Various Test Performed on 304L Stainless Steel Hex Rod

  •  Chemical examination
  •  Mechanical examining like Elongation, tensile and reduction of area
  •  Positive material recognition
  •  Buckling & Crushing test
  •  Pitting Corrosion Test
  •  Radiographic Test
  •  Eddy Current test

Stainless Steel 304L Square Bar Weight Chart

Size in mm Avg. Wght
KG/MTR KG/FT
10 x 10 0.80 0.20
12 x 12 1.10 0.30
14 x 14 1.50 0.50
16 x 16 2.00 0.60
17 x 17 2.27 0.69
20 x 20 3.14 1.00
25 x 25 4.90 1.50
32 x 32 8.00 2.40
40 x 40 12.60 3.80
42 X 42 13.85 4.22
50 x 50 19.60 6.00
53 X 53 22.05 6.72
56 x 56 24.60 7.50
63 x 63 31.20 9.50

Supplier of AISI 304L Forged Bar in Following Surface Finish

CF Cold finished CD Cold drawn
ST Smooth turned CG Centreless ground
P&T Peeled and turned P Polished
SRE Slit rolled edge BD Bright drawn
RT Rough turned/peeled PR Peeled and reeled
HRAP Hot rolled annealed and pickled HF Hot finished