- +91-9920207386
- riyan@pipesind.com
S355J2 Pipe
Products We Offer
S355J2 Pipe
S355J2 grade of pipes is a low carbon grade. This S355J2 Pipe has a good chemical composition of silicon, sulfur, manganese, and potassium. These pipes possess good corrosion resistance and don’t erode easily. They don’t dissociate or deform under any levels of pressure or temperature. We are only supplier of S355J2+N pipe which is a welder-friendly pipe that can readily be machined. The pipe is highly versatile and is utilized for critical applications due to its superior strength. These pipes can be availed in lengths up to 18000mm. An S355J2 Carbon Steel Pipe possesses a tensile strength between 490Mpa to 630Mpa and a yield strength between 315Mpa to 355Mpa. They can be elongated by a minimum of 22%. The EN 10210 S355J2+N Carbon Steel Seamless Pipe is designed with high concentrations of carbon. This single piece of metal pipe possesses superior strength and exceptional tolerances in stress-induced environments. An S355J2 Seamless Pipe can be availed in lengths between 4mm to 219mm. All our products are quality tested and performance certified.
The EN 10025-2 S355J2+N Structural Steel Pipe is designed with high strength and exceptional surface finish. These pipes are available in sizes up to 300mm which, can be customized on request. An S355J2 Hollow Section is the most preferred hollow section pipe in the industry. Produced via the high-frequency induction welding process, they work well in different environments. The EN 10025 S355J2 tube is produced making use of cutting-edge technology and the best raw material. These tubes can be availed in different schedules and wall thickness between 1.8mm to 14.27mm. The S355j2 Square Tube can be availed in different dimensions to meet all your requirements.
The S355J2 EN 10025-2 grade products are widely used in chemical equipment, oil and gas transportation, automotive sector, mining systems, etc. Our products can be availed at reasonable prices. Contact us or visit any of our outlets for more information.
S355J2 Pipe
EN 10025 S355J2 Tube Dimension chart
| Nominal Bore (mm) |
O.D. (mm) |
Thk. (mm) |
Wght (kg/m) |
| 15 | 21.3 | 2.00 | 0.95 |
| 2.60 | 1.21 | ||
| 3.20 | 1.44 | ||
| 20 | 26.9 | 2.30 | 1.38 |
| 2.60 | 1.56 | ||
| 3.20 | 1.87 | ||
| 25 | 33.7 | 2.60 | 1.98 |
| 3.20 | 0.24 | ||
| 4.00 | 2.93 | ||
| 32 | 42.4 | 2.60 | 2.54 |
| 3.20 | 3.01 | ||
| 4.00 | 3.79 | ||
| 40 | 48.3 | 2.90 | 3.23 |
| 3.20 | 3.56 | ||
| 4.00 | 4.37 | ||
| 50 | 60.3 | 2.90 | 4.08 |
| 3.60 | 5.03 | ||
| 5.00 | 6.19 | ||
| 65 | 76.1 | 3.20 | 5.71 |
| 3.60 | 6.42 | ||
| 4.50 | 7.93 | ||
| 80 | 88.9 | 3.20 | 6.72 |
| 4.00 | 8.36 | ||
| 4.80 | 9.90 | ||
| 100 | 114.3 | 3.60 | 9.75 |
| 4.50 | 12.20 | ||
| 5.40 | 14.50 | ||
| 125 | 139.7 | 4.50 | 15.00 |
| 4.80 | 15.90 | ||
| 5.40 | 17.90 | ||
| 150 | 165.1 | 4.50 | 17.80 |
| 4.80 | 18.90 | ||
| 5.40 | 21.30 | ||
| 150 | 168.3 | 5.00 | 20.1 |
| 6.3 | 25.2 | ||
| 8.00 | 31.6 | ||
| 10.00 | 39 | ||
| 12.5 | 48 | ||
| 200 | 219.1 | 4.80 | 25.38 |
| 6.00 | 31.51 | ||
| 8.00 | 41.67 | ||
| 10.00 | 51.59 | ||
| 250 | 273 | 6.00 | 39.51 |
| 8.00 | 52.30 | ||
| 10.00 | 64.59 | ||
| 300 | 323.9 | 6.30 | 49.36 |
| 8.00 | 62.35 | ||
| 10.00 | 77.44 |
EN 10025-2 S355J2+N Chemical Composition
| Grade | C | Si | Mn | P | S |
| S355J2H (1.0576) | max 0.22 | max 0.55 | max 1.6 | max 0.03 | max 0.03 |
Spec Chart of S355J2 Square Tube
| Standard | BS EN 10210 |
|---|---|
| Sizes | 300 mm NB |
| Outside Diameter | 21.3 to 457.2 millimeter. |
| Grade | S355J2+N |
| Type | Welded | ERW | Seamless |
| Length | 6000 - 14000 millimeter, Cut to length |
| Surface Treatment | Supplier in Black Painted | Corrosion Resistant Coating | Galvanized | FBE |
| Wall Thickness | 1.8 to 14.27mm |
| Delivery Condition | Annealed & Pickled, Polished, Bright & Annealed, etc |
Buy S355J2 Carbon Steel Pipe at Cheap Rates, Exporter of EN 10025-2 S355J2+N Structural Steel Pipe.
S355J2 Pipe Price in India
| Product | Price |
|---|---|
| 4 inch SCH40 Hot Rolled S355j2 Pipe | $540.00 - $695.00/ Ton |
| S355j2 hot dipped galvanized steel square pipe | $989.00/ Ton |
| S355J2 SSAW Steel Pipe For piling construction | $500.00 - $620.00/ Ton |
| 1 1/2" x SCH40 S355J2 12.000mm EN10219 longitudinal welded steel pipes | $520.00/ Ton |
Choose us for the best price of tubo S355 J2 in India, Find your sizes in our stock of S355J2+N EN 10029 Tube in Mumbai, Many S355J2 material suppliers, stockholders, dealers, stockists, retailers, distributors, importers, exporters, and wholesalers. Contact for a Quick Quote!
Equivalent Material of EN 10210 S355J2+N Welded Pipe
| USA | Germany DIN,WNr |
Japan JIS |
France AFNOR |
England BS |
Italy UNI |
European old EN |
Sweden SS |
Czechia CSN |
| A656 | 1.0577 ASt52 St52-3N |
SS490YA | A52FP | 224-460 | S355J2G4 | Fe510D2 S355J2G4 |
2134-01 | 11531 |
Steel Grade S355J2+N Seamless Tube Dimension Tolerance
| Execution | Size Range | O.D. Tolerance | Wall tolerance |
|---|---|---|---|
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm |
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) |
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm |
Standard length tolerance
| Component length (mm) | O.D. 30-100 mm | O.D. 100-254 mm |
|---|---|---|
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
Get Free sample of S355J2 Seamless Pipe, Refer Steel Grade S355J2+N Pipe and EN 10210 S355J2+N Carbon Steel Seamless Pipe Sizing Chart.
EN 1.0577 Hot Finished Structural Hollow Sections Standard Sizes
| Size mm | kg/m | Size mm | kg/m |
| 40 x 20 x 2.0 | 1.68 | 40 x 20 x 2.5 | 2.03 |
| 40 x 20 x 3.0 | 2.36 | 40 x 25 x 1.5 | 1.44 |
| 40 x 25 x 2.0 | 1.89 | 40 x 25 x 2.5 | 2.23 |
| 50 x 25 x 2.0 | 2.21 | 50 x 25 x 2.5 | 2.72 |
| 50 x 25 x 3.0 | 3.22 | 50 x 30 x 2.5 | 2.92 |
| 50 x 30 x 3.0 | 3.45 | 50 x 30 x 4.0 | 4.46 |
| 50 x 40 x 3.0 | 3.77 | 60 x 40 x 2.0 | 2.93 |
| 60 x 40 x 2.5 | 3.71 | 60 x 40 x 3.0 | 4.39 |
| 60 x 40 x 4.0 | 5.72 | 70 x 50 x 2 | 3.56 |
| 70 x 50 x 2.5 | 4.39 | 70 x 50 x 3.0 | 5.19 |
| 70 x 50 x 4.0 | 6.71 | 80 x 40 x 2.5 | 4.26 |
| 80 x 40 x 3.0 | 5.34 | 80 x 40 x 4.0 | 6.97 |
| 80 x 40 x 5.0 | 8.54 | 80 x 50 x 3.0 | 5.66 |
| 80 x 50 x 4.0 | 7.34 | 90 x 50 x 3.0 | 6.28 |
| 90 x 50 x 3.6 | 7.46 | 90 x 50 x 5.0 | 10.11 |
| 100 x 50 x 2.5 | 5.63 | 100 x 50 x 3.0 | 6.75 |
| 100 x 50 x 4.0 | 8.86 | 100 x 50 x 5.0 | 10.90 |
| 100 x 60 x 3.0 | 7.22 | 100 x 60 x 3.6 | 8.59 |
| 100 x 60 x 5.0 | 11.70 | 120 x 80 x 2.5 | 7.65 |
| 120 x 80 x 3.0 | 9.03 | 120 x 80 x 4.0 | 12.00 |
| 120 x 80 x 5.0 | 14.80 | 120 x 80 x 6.0 | 17.60 |
| 120 x 80 x 8.0 | 22.9 | 150 x 100 x 5.0 | 18.70 |
| 150 x 100 x 6.0 | 22.30 | 150 x 100 x 8.0 | 29.10 |
| 150 x 100 x 10.0 | 35.70 | 160 x 80 x 5.0 | 18.00 |
| 160 x 80 x 6.0 | 21.30 | 160 x 80 x 8.0 | 27.90 |
| 200 x 100 x 5.0 | 22.70 | 200 x 100 x 6.0 | 27.00 |
| 200 x 100 x 8.0 | 35.4 | 200 x 100 x 10.0 | 43.60 |
| 250 x 150 x 5.0 | 30.5 | 250 x 150 x 6.0 | 38.2 |
| 250 x 150 x 8.0 | 48.0 | 250 x 150 x 10 | 59.3 |
| 300 x 200 x 6.0 | 48.10 | 300 x 200 x 8.0 | 60.50 |
| 300 x 200 x 10.0 | 75.00 | 400 x 200 x 8.0 | 73.10 |
| 400 x 200 x 10.0 | 90.70 | 400 x 200 x 16 | 142.00 |
Various Types of S355J2 Seamless Pipe Test
- Radiographic Test
- Charpy Impact Test
- Ultrasonic Test
- Pitting Corrosion Test
- Positive Material Recognition
- Hydrostatic Test
Call us for discount on DIN EN 10025-2 S355J2 Hollow Section, Find out S355j2 Pipe Heat treatment, Check Carbon Steel s355j2 Tube mechanical property.
EN 10025 S355J2+N Square Tube Heat treatment
| Hot Forming | Heat Treatment | |||
|---|---|---|---|---|
| Temperature°C | Cooling Type | Normalizing 1″ | Stress relieving anneal 2″ | Cooling Type |
| 700-750 | Air | 850-950°C | 580-630°C | Air |
S355J2+N Steel Line Pipe Processing
- Hot rolled
- Cold rolled
- Cutting
- Forming Machining/ Drilling
- Grinding
- Testing
S355J2 Pipe Mechanical Strength
| Specification | EN10210 S355J2H |
|---|---|
| Tensile Strength Rm N/mm2: 3 ≤ T ≤ 100mm | 470 – 630 |
| Yield Strength ReH Min, N/mm2: T ≤ 16mm | 355 |
| Min Elongation % T ≤ 40mm on gauge length 5.65. √S0 | 22 |
| Impact properties Minimum Ave energy (J) at -20°C | 27 |
Supplier of S355J2+N (1.0577) DIN EN 10025-2 Pipe in Following Industries
- Chemical Equipment
- Automotive Sector
- Petroleum
- Pipeline steel
- Mining Machinery
- Gas, oil and water transportation
EN 10029 S355J2+N Material Hardness
- S355J2 ranges from 146 HB to 187 HB
Carbon Steel S355J2 Charpy Impact
| Charpy-V-Notch Longitudinal Avg. from 3 Speimens Thk.>10 < 150mm | 27 Joules at -20°C |
